MARINER 200 – The powerful mobile compressor for breathing air with integrated crash frame

BAUER MARINER 200-E breathing air compressor with electric motor and control

BAUER MARINER 200-B high-pressure compressor with petrol engine

BAUER MARINER 200-B high-pressure compressor with petrol engine, with trolley

Tough: Thanks to an incredibly durable driving gear. Suitable for short-term operation and continuous service

Durable and robust: Three-stage or four-stage construction and industrial roller bearings maximise the service life of the units

Protected against corrosion: With an ultra-lightweight aluminium chassis for the best possible protection against corrosion

Reliable lubrication: With generously dimensioned low-pressure oil pump

With charging rate of 200 l/min, the MARINER 200 is the versatile mobile compressor unit in the PROFI-LINE II series which impresses with its range of equipment: the corrosion-resistant crash frame to which system accessories can be attached is integrated as a standard feature.

Furthermore, the first stage and the high-pressure final stage of the MARINER 200 feature piston rings made from a new high-tech plastic which are virtually wear-free.

The vibration-reducing motor rocker design optimises smooth running.

Thanks to the extensive range of BAUER accessories, the compressor can be customised to meet all manner of different requirements and intended uses in next to no time.

Suitable for use as a diving compressor, shipping compressor, for installation in yachts, as a fire service compressor, paintball compressor and in many other applications. Petrol and electric versions available.

All the information you need at your fingertips!

IK 120 compressor block
The BAUER IK 120 series compressor block has been designed for the most demanding professional applications. Dimensioned for more than 30,000 operating hours, it has proven its worth in thousands of application scenarios. Read more

P 21 filter system
When used in conjunction with original BAUER filter cartridges, the P 21 filter system with integrated oil and water separator and pressure retention check valve can be relied upon for breathing air treatment conforming to DIN EN 12021¹. A type-tested and sealed final pressure safety valve enables particularly high levels of operational safety to be achieved. 140 m³ of air can be treated.

¹ If the units are maintained and installed correctly as described in the operating instructions or user manual and if the concentration of CO₂ in the intake air does not exceed the values specified in the applicable standard for breathing air.

Crash frame incl. handles
The corrosion-resistant crash frame provides additional protection for the unit and can accommodate additional accessories such as a compressor control or a larger filter system. The handles make moving the unit easy and convenient.

Filling device complete with final pressure gauge

Filling device
The filling device comprises a flexible "UNIMAM" high-pressure filling hose and filling valve complete with final pressure gauge. The final pressure gauge makes it easy to read off the filling pressure. It is protected against damage by a durable rubber jacket.

High-quality UNIMAM high-pressure filling hose 200 or 300 bar

Filling hose
High-quality UNIMAM high-pressure filling hoses made from food-safe and long-life hose material make for flexible and safe handling. Swivel hose connections enable the filling valve to be connected to the breathing air cylinder quickly, easily and safely.

Motor rocker
The integration of a motor rocker means that the tension of the V-belt no longer has to be adjusted.

P 31 filter system
When used in conjunction with original BAUER filter cartridges, the P 31 filter system with integrated oil and water separator and pressure retention check valve can be relied upon for breathing air treatment conforming to DIN EN 12021¹. A type-tested and sealed final pressure safety valve enables particularly high levels of operational safety to be achieved. 600 m³ of air can be treated.

P 41 Purification system
When used in conjunction with original BAUER filter cartridges, the P 41 filter system with additional oil and water separator and pressure retention check valve can be relied upon for breathing air treatment conforming to DIN EN 12021:2014¹. A type-tested and sealed final pressure safety valve enables particularly high levels of operational safety to be achieved. 1550 m³ of air can be treated.

¹ If the units are maintained and installed correctly as described in the user manual and subject to the BAUER AERO-GUARD being used if CO₂ concentration in the intake air exceeds prescribed standard values.

B-TIMER filter cartridge monitoring
The operating hours and the current level of cartridge saturation are displayed on the unique B-TIMER mini-computer. Read more

SECURUS is a direct asset to your safety!
SECURUS is an electronic filter cartridge saturation control which continuously monitors the ability of the final filter cartridge to dry breathing air in accordance with the standard EN 12021:2014. Read more

Additional intermediate separator downstream of the first stage

Additional intermediate separator after the first stage
In the case of operation in locations where air humidity is high (tropical regions, for example), we recommend installing a separator downstream of the first compressor stage. This can extend the service life of the unit and reduce maintenance costs.

Compressor control (PROFI-LINE)
This electrical control system with additional monitoring electronics switches the compressor off automatically when the final pressure is reached in the system, measures operating hours and oil pressure, and displays the current operating status. As such, it facilitates fully automatic operation with storage systems.

Automatic condensate drain incl. final pressure shutdown and control conforming to European CE standard
The automatic condensate drain B-DRAIN is controlled via the electrical control system. The condensate produced can be collected in a condensate tank for disposal in an environmentally-friendly way.

Switch-over device PN 300/200 bar
For easy and flexible switching from 200 to 300 bar and vice versa. Read more

Additional filling device PN 200 or PN 300 bar
There is the option to supplement an existing filling valve with the addition of one or more filling valves with filling hoses of varying lengths.

Trolley
The trolley provides an easy and convenient mode of transport for mobile compressor units. Fitted with pneumatic tyres, the trolley maximises mobility.

Telescopic intake tube
The telescopic intake tube is highly recommended when operating compressor units in locations with increased concentrations of hazardous substances such as CO or CO₂.
It enables the intake range of the compressor to be moved to a suitable location.

Other voltages/frequencies
All electric motors are available with other voltages and frequencies on request.

Paint finish/Special paint finish
All frame parts of BAUER compressors are finished with a sophisticated powder coating. Read more

Scope of delivery, basic version
Complete compressor unit ready for operation. Read more

MARINER 200 compressor, 90 – 420 bar, 200 l/min, high-pressure compressor for compressing air and breathing air
Type designation	Charging rate ¹	Max operating pressure	Drive		Filter system	Net weight	Dimensions L × W × H
	l/min	bar	Motor	kW		approx. kg	cm
MARINER 200-B	200	350	Petrol engine	6.6	P 21	115	130 × 62 × 63
MARINER 200-E	200	350	Three-phase motor, 400 V, 50 Hz ²	4.0	P 21	115	130 × 60 × 63
MARINER 200/420-E	200	420	Three-phase motor, 400 V, 50 Hz ²	5.5	P 41/420	185	130 × 65 × 81